NTC Thermistors ATH10KL2C Series

In the previous two articles, NTC thermistor series ATH10KBL2A and ATH10KL2B have been introduced already. In this article, we will focus on ATH10KL2C series NTC thermistors. This NTC thermistor is also packaged in a small ring lug for easy mounting. Inside the ring lug, there is a thermistor head, ATH10K1R25, which is also in ATH10KL2B NTC thermistors. Therefore, the three thermistors have the same characteristics.

The length of the ring lug of ATH10KL2C series thermistors is 11.2mm, and the width is 5.5mm. The length of the lead wires of this series NTC thermistors is 70mm. Therefore, the three versions come with the part numbers, ATH10KL2C, ATH10KL2CT70 and ATH10KL2CT70S. 70 refers to the length. As mentioned in the last two articles, ATH10KL2CT70 and ATH10KL2CT70S have plastic tubing covered with the lead wires and the latter is the sealed version.

NTC thermistor can work with TEC module and heat sink in order to measure and control temperature in some systems.

For technical data of this NTC thermistor series, please refer to:

http://www.analogtechnologies.com/ath10kl2c.html

For more types of low drift NTC thermistors, please visit:

http://www.analogtechnologies.com/thermistor.html

For more and various types of electronic products, please visit our homepage at:

http://www.analogtechnologies.com/

NTC Thermistors Series ATH10KL2B

ATH10KL2B series NTC thermistor is a thermistor assembly with a ring lug outside a glass encapsulated thermistor head. This series NTC thermistors have three versions, namely, ATH10KL2B, ATH10KL2BT70 and ATH10KL2BT70S. The first one is the basic version. The latter two versions are the upgraded ones. ATH10KL2BT70 comes with two lead wires with plastic tubing, and ATH10KL2BT70S has it sealed between the plastic tubing and the thermistor head. Sealed thermistors can be used in applications with liquid.

ATH10KL2B series NTC thermistors are different from ATH10KBL2A and ATH10KL2C. The sizes of the ring lugs are different. Moreover, the thermistor head of ATH10KBL2A is ATH10KR8B, while the thermistor heads of ATH10KL2B and ATH10KL2C are ATH10K1R25. Therefore, the resistance temperature characteristics of ATH10KL2B and ATH10KL2C are the same. Users can choose proper ones from them based on the applications.

NTC thermistor can work with TEC module and heat sink in order to measure and control temperature in some systems.

For technical data of this NTC thermistor series, please refer to:

http://www.analogtechnologies.com/ath10kl2b.html

For more types of low drift NTC thermistors, please visit:

http://www.analogtechnologies.com/thermistor.html

For more and various types of electronic products, please visit our homepage at:

http://www.analogtechnologies.com/

ATH10KBL2A Series NTC Thermistors

This thermistor ATH10KBL2A is a replacement for ATH10KL2A. ATH10KBL2A series NTC thermistors consist of three versions, ATH10KBL2A, ATH10KBL2AT65 and ATH10KBL2AT65S. The latter two thermistors are based on ATH10KBL2A, with more features. ATH10KBL2A has two bare copper coated lead wires, and ATH10KBL2AT65 has the two lead wires covered with high temperature plastic tubing, and the ATH10KBL2AT65S is the sealed version of ATH10KBL2AT65. Sealedthermistors can be used in non-corrosive liquid for temperature measurement.

ATH10KBL2A series NTC thermistors are glass encapsulated thermsitors packaged in an extra small ring lug, which is convenient for mounting and fixing. The length of the ring lug is 8.1mm, and the width is 3.6mm. The length of the lead wire is 65mm. These NTC thermistors come with long term stability and reliability. The resistance accuracy is 1%. As indicated in the part number, ATH10KBL2A, the nominal resistance at 25°C is 10k.

NTC thermistor can work with TEC module and heat sink in order to measure and control temperature in some systems.

For technical data of this NTC thermistor series, please refer to:

http://www.analogtechnologies.com/ath10kbl2a.html

For more types of low drift NTC thermistors, please visit:

http://www.analogtechnologies.com/thermistor.html

For more and various types of electronic products, please visit our homepage at:

http://www.analogtechnologies.com/

ATE1-241 TEC Module Series

As the part number indicates, ATE1-241 series TEC modules come with 241 pairs of Peltier elements. Peltier elements are the basic components of TEC module, which is also called Peltier module or thermo electronic cooler. TEC modules are designed for temperature regulation on target objects.

The maximum input voltage of this series TEC modules is 28.9V, with different power ratings and dimensions. The maximum temperature difference is 68°C, which can be achieved by single stage TEC module. If a higher temperature difference is needed, then two or more stages TEC modules should be utilized. All the TEC modules in this series are sealed version, which can prevent moisture from entering into the Peltier elements. Therefore, if the TEC modules are used in moisture temperature, the sealed version is highly recommended.

TEC modules can be controlled by our TEC controllers with high stability and high efficiency. Moreover, NTC thermistors can also work with our TEC modules for stable and accurate temperature sensing. Please visit this page for more information:

http://www.analogtechnologies.com/thermistor.html

http://www.analogtechnologies.com/tec-controller.html

ATI provides more standard TEC modules and thermal cycling TEC modules, for more technical data of TEC modules, please visit our webpage and datasheet:

http://www.analogtechnologies.com/tec-module.html

For more products of thermal system, please visit:

http://www.analogtechnologies.com/thermal_system_components.html

ATE1-31 TEC Module Series

TEC module is short for thermoelectric modules, and also called Peltier cooler. The reason why it’s called Peltier cooler is that it has multiple Peltier elements inside the TEC module, which are the main components in the TEC module. TEC modules can be used to regulate the temperature of an object and stabilize the temperature in a certain temperature range. As indicated in the part number, ATE1-31 series TEC modules have 31 pairs of Peltier elements inside the TEC module, and it is a single stage TEC module.

There are two flat ceramic plates on both side of the TEC module outside the Peltier elements. There are mainly three methods to install TEC modules, i.e., bonding with epoxy, clamping and soldering. Soldering is the most efficient way to use the TEC modules, but it’s not convenient for maintenance. Clamping and bonding with epoxy are relatively simple and easy for most users by using thermal conductive pad or thermal paste.

TEC modules can be controlled by our TEC controllers, please visit this page for more information:

http://www.analogtechnologies.com/tec-controller.html

ATI provides more standard TEC modules and thermal cycling TEC modules, for more technical data of TEC modules, please visit our webpage and datasheet:

http://www.analogtechnologies.com/tec-module.html

For more products of thermal system, please visit:

http://www.analogtechnologies.com/thermal_system_components.html

Evaluation Board TECEV104 for TECA1XVXVD

TECEV104 TEC controller evaluation board is a replacement for the evaluation board TECEV103, which is not recommended for new design. TECEV104 evaluation board is applied to evaluate TECA1-5V-5V-D TEC controller, which can drive TEC modules with up to 2A current efficiently. Since no compensation network is integrated in the TECA1-5V-5V-D TEC controller, this evaluation board is used for tuning the TEC controller’s external compensation network in order to match the characteristics of users’ thermal load.

The main functions of this TEC controller evaluation board is to set maximum output voltage and set-point temperature, monitor output voltage and actual thermal load temperature, and tune the compensation network so as to match thermal load. There are LEDs that display the TEC controller’s temperature status. Moreover, there are some connection pads for connecting with external components or devices.

This TEC controller evaluation board can only evaluate TEC controller of DIP package.

For more technical data of this TEC controller evaluation board, please visit:

http://www.analogtechnologies.com/Evaluation_Board_TECEV104.html

It’s recommended to read the datasheet of TECA1-5V-5V-D TEC controller for more detailed application information. Please visit:

http://www.analogtechnologies.com/TECA1-XV-XV-D.html

For more types of TEC controllers and evaluation board, please visit us at:

http://www.analogtechnologies.com/tec-controller.html

Most Convenient SMT Inductor Kits

SMT Inductor kits are the kits containing different values of inductors with different sizes and quantities. SMT inductor kit, SMT capacitor kit and SMT resistor kit are the three main kits in ATI kits family. These three kits are all based on a special container, SMT component enclosure. This enclosure is empty, with 128 individually lidded coverlets and one top cover. The enclosure is leak proof and shock proof, and a A4 paper like in size, so it’s convenient to carry with you by placing it into your bag.

There are 1008 size with 60 values, 0805 size with 85 values, 0603 size with 88 values, and 0402 size with 74 values. For each values, the quantity can be 20pcs, 50pcs, and 100pcs. Also, there are 0603 size with 35 values and 10pcs per value, and 0402 size with 43 values and 10pcs per value. All the inductors are from world renowned inductor companies, so the quality can be guaranteed. Moreover, when one inductor is used up, you can refill the compartment easily by yourself. Therefore, the kit is recyclable.

We have more SMT kits in our website, such as capacitor kits and resistor kits.

Our web site is http://www.analogtechnologies.com/capacitorkits.html

Most Convenient SMT Capacitor Kits

SMT capacitor kit is one the various kinds of component kits made by ATI, which is very popular in US and worldwide market among electronic engineers and research institutes, etc. This capacitor kit is easy and convenient to carry since it’s just like a teaching book or a A4 paper in size. There are perfect leak proof and shock proof measures in the kit, e.g., a foam pad is placed inside the top cover to keep all the coverlets closed after the top cover is closed.

The capacitor kit contains multiple types of SMT capacitors with different sizes, values, and pieces. The capacitor kits can be 1206 size with 77 values, 0805 size with 83 values, 0603 size with 79 values, and 0402 size with 70 values. Each value comes with selectable quantities, such as 50pcs, 100pcs, 200pcs and 500pcs. For example, for the part number “C08-100”, it refers that the size is 0805, there are 83 values capacitors, and the quantity of each value is 100pcs. There are more options for the capacitor kits.

We have more SMT kits in our website, such as inductor kits and resistor kits.

Our web site is http://www.analogtechnologies.com/capacitorkits.html

Most Convenient SMT Resistor Kits

SMT Resistor Kit made in ATI is the most convenient resistor kit in the world. This resistor kit is based on a SMT Component Enclosure, which comes with 128 individually lidded coverlets and one top cover. There is a foam pad inside the top cover, which keeps all the coverlets closed when the top cover is closed. The resistor kit is not large, just like the size of a teaching book or A4 paper.

There are multiple types of resistors with different resistance values, quantities, and sizes. For example, the size can be 0402, 0603, 0805 and 1206; the resistance values can be from 128 values and 510 values, and the former is in one resistor kits and the latter need a set of four resistor kits to contain. The quantity of each value can be 50pcs, 100pcs, 200pcs and 500pcs. The component value is printed on each lid. Take one part number as an example, R08E24-200, “R” refers to resistor kit, “08” is 0805 size, “E24” is 128 values, and “200” means there are 200pcs for each resistance value.

We have more SMT kits in our website, such as inductor kits and capacitor kits.

Our web site is http://www.analogtechnologies.com/resistorkits.html

ATE1-161 TEC Module Series

ATE1-161 series TEC modules are standard TEC modules with 161 pairs of Peltier elements. Peltier elements are the basic components of TEC modules. The TEC modules are widely used in solid state laser, refrigerator, air conditioner, optical components, CPU of computers, etc.

The maximum input voltage of ATE1-161 series TEC modules is 19.3V. The maximum temperature difference between the two ceramic plates is 67°C. There are three TEC modules in this series with the maximum current of 4A, 5A and 6A respectively, which can meet different application requirements. All of the TEC modules in this series are sealed.

Please note this TEC modules series cannot bear thermal cycling applications, which may largely reduce the operational life of TEC modules. ATI provides thermal cycling TEC modules, the service life will be maintained to be long when the TEC modules shift from heating to cooling, and vice versa. These thermal cycling TEC modules cost more than standard ones.

TEC modules can be controlled by our TEC controllers, please visit this page for more information:

http://www.analogtechnologies.com/tec-controller.html

ATI provides more standard TEC modules and thermal cycling TEC modules, for more technical data of TEC modules, please visit our webpage and datasheet:

http://www.analogtechnologies.com/tec-module.html

For more products of thermal system, please visit:

http://www.analogtechnologies.com/thermal_system_components.html